Clear Natural Spas
Poolstyle Mini Above Ground Pool Heat Pump
- Poolstyle Mini Heat Pump For Above Ground Pools
- Our Best Performing Plug & Play Heat Pump
- Very Limited Stock Available In The UK for 2023
- Super Energy Saving - Pay For £1 & Get Between £4.50 & £6.50 Out
- Half The Running Cost Of A 3kw Bestway Heater
- Works When Air Is 10°C
- Installation Accessories Included To Connect To Intex & Bestway 1.25" Hose
- Perfect Heat Pump For Extended Summer Season
- 2 Year Full Replacement Warranty
PRODUCT INFO:
Poolstyle Mini Heat Pumps are designed especially for above ground pools. They come with a 3-Pin UK plug and offer a COP between 4.5 to 6.5, meaning for every £1 you spend on electricity you get an output between £4.50 and £6.50 of heating into your pool. As they are designed for Above Ground Pools they will heat when the air temperature is 10°C and will even heat water up to 40°C.
The Poolstyle Mini 8 Heat Pump offers over twice the heat output of a 3kw Bestway Electric Heater, but costs less than 50% in running costs. Using the average cost of electricity in 2022, at 28p per kwh, the Poolstyle Mini 8 Heat Pump should see an R.O.I. and start saving you money after only 2 months of swimming pool heating.
The Poolstyle Mini Heat Pump will allow you to heat you pool for an extended Summer season, normally between May to September, but of course this is dependant on the ambient air temperature.
To get the the highest heating output from your Poolstyle Mini Heat Pump we recommend using the best possible solar cover you can afford and leaving it on whenever someone is not in the pool. Having the solar cover in place during the day can increase pool water temperature, in conjunction with the Poolstyle Mini Heat Pump by up to 8°C, and at night just having the solar cover on the pool can reduce heat loss by up to 3°C per night.
The Poolstyle Mini Heat Pumps come in two heating outputs, a 6kw and a 8kw, whose figures are based on an ambient air temperature of 30°C. These heat pumps will achieve 5.8kw and 7.2kw, respectively, based on an air temperature of 26°C, but as with all heat pumps the output decreases as the air temperature drops, so we would recommend always buying a heat pump that will heat your pool at 15°C, or slightly higher, as this will allow you to keep your pool up to temperature, even in inclement weather, meaning your pool will be swim ready when the weather changes.
To help you choose the correct Poolstyle Mini Heat Pump for your above ground pool we have provided a chart below showing the outputs at both 26°C Air temperature as well as 15°C will heat pools up to 35m3 in the main Summer months
A flow rate of between 2,000 litres per hour (2m3) and 4,000 litres per hour (4m3) is ideal for the Poolstyle Mini Heat Pump.
|
Poolstyle Heat Pump Size |
Max. Suggested Pool Size |
|
Mini 6 |
15ft x 48" Metal Frame Pool |
|
Mini 8 |
18ft x 48" Metal Frame Pool |
|
Model |
Power Output At Air 30°C |
Power Output At Air 27°C |
Max Pool Size |
Power Output At Air 15°C |
|
PoolStyle Mini 6 |
6.0kw |
5.8kw |
25 m3 |
3.8kw |
|
PoolStyle Mini 8 |
8.0kw |
7.2kw |
35 m3 |
4.8kw |
Electrical Requirements - What do I need for my hot tub?
We have Hot Tubs that can be run from a standard 13 amp socket...these are normally single pump tubs.
Twin pump Hot Tubs need a dedicated 32 amp power supply to be installed at your house. What does this really mean? Well, you would need to get an electrician to visit and present him with our electrical requirements guidelines which you can download in PDF format below. Show him where you would like your new Hot Tub and ask him for a quotation. The cost of this can vary and it all depends on your individual property. The distance from the house is also a factor in this calculation.
Electrical Installation Guidelines
- The power supplied to the spa must be a dedicated circuit with no other appliances connected.
- The spa must be permanently connected (hard wired) to the power supply.
- No plug-in connections or extension leads are to be used.
- A 30ma RCD (residual current circuit device) must be installed at the power supply in the property.
- The spa must be supplied with 32 amp feed 220/240 volts.
- A 32 amp circuit breaker should be installed and clearly marked "spa".
- The spa should be fed with a 6mm 3-core steel wire armoured cable.
- Isolation should be via a 32amp 2-pole rotary weatherproof switch.
- The work must be carried out in accordance with the current (17th edition) IEE wiring regulations and by a qualified electrician.
- The cable needs to be run to the isolator switch (isolator to be sited a minimum of 2mtrs and ideally a maximum of 5mtrs from the spa) with a minimum 5-metre tail & gland sufficient for connection to the spa. This is how the installation must be left (safe) at this stage.
- A date and time for the final connection and testing will be arranged between ourselves and the electrician. Our Installation team will deliver and position the spa and also route the cable to the connection point. The electrician will return for final connection & testing on the day of installation.
Please note that these instructions are for guideline purposes only and any electrical work should be carried out or inspected by a qualified electrician prior to installation of the spa.
GENERAL DELIVERY TERMS AND ADVICE
Swim spa Delivery -These are looked at on a case by case basis due to the complexity of delivery variables. Usually, a crane is required. We specialise in minimising and subsidising this cost. We also have several delivery/crane companies we partner with
Hot Tub Delivery –We offer free delivery and installation on all of our hot tubs within 50 miles **
Hot tub deliveries outside this area can still be free! Give us a call to discuss your individual requirements…..
** Terms and conditions apply
The hot tub will be delivered on its side on a trolley….No lifting can be done. Small steps can be overcome with the use of ramps. If you suspect you need a crane, call us to discuss, we organise quite a few lifts it may not be as expensive as you think!
Installation Requirements:
What would normally happen in this section is companies would ask you to learn and understand the size of the tub, how it will be delivered, then………. make you decide if it will fit in.
US…let’s do it together….. Site Survey is a must! We don’t always need to attend your address, after all it’s not 1999 anymore. Facetime, Skype and Google maps and 99% of the time we can get all the info we need. Send us a short video clip of your access… Getting a tub should be fun not a hassle, choosing us helps with that process from start to finish….
For those of you who like visualise how its delivered then these pictures should help, We’ll get a video done soon to take you through the process……
UPDATE.....
We said we would do a video....This one had a crane (which is additional cost) although not normally required, more importantly the video shows all the other equipment and how the spa is transported on our dolly.
HSG282 Extra info for Holiday Lets/Holiday Parks
