GoldHorizons

Gold Horizons Pool Leak-Seeker

£24

GOLD HORIZONS POOL LEAK-SEEKER 1LT

Seals minor cracks
Suitable for pool and spa pipework
Fast acting liquid for easy application


APPLICATION INSTRUCTIONS

  • Prior to applying Pool Leak-Seeker, remove your automatic pool cleaner from the pool.
  • Turn the pool pump off and set the filter to ‘bypass’ or re-circulate’ mode. If neither of these options are available, remove the filter grids or cartridges from the filter prior to commencing treatment. Isolate all dosing control/tablet feeders/salt chlorinators from the water line prior to dosing with Leak-Seeker.
  • For leaks in the pool surface - add the Leak-Seeker directly into the pool in or around the location of the leak. Otherwise distribute the product evenly around the pool. For leaks in the pipework – add the required dose of Leak-Seeker directly into the skimmer basket when the pumps are ‘off’, allowing the product to percolate through the pipework. If unsure of leak location follow the instructions for leaks in the pool surface (above).
  • Wait 30 minutes and then turn the pump ‘on’ and leave the pump running for a minimum of 8 hours.
  • Mark the level and check again in 24 hours.
  • A second application may be required, especially in larger pools.
  • Leave the pool until all the residue has settled (usually within 6 hours) before vacuuming any residue in the pool to ‘waste’.
  • Replace the filter grids or cartridges after 24 hours and resume normal operation.
  • Handle this product in a well ventilated area, preferably outdoors
  • Ensure lid is replaced and sealed after use
  • Store in a cool, dry place. 
  • Wash hands after use

 

 

WARNING

  • Contains Sodium Silicate
  • Causes serious eye damage
  • Causes Skin irritation
  • Wear protective gloves/clothing/eye protection/face protection
  • Do not breathe mists/vapours/spray
  • IF IN EYES: Rinse cautiously with water for several minutes
  • IF ON SKIN: Wash with plenty of soap and water
  • Store locked up

                                  Electrical Requirements - What do I need for my hot tub?

                                  We have Hot Tubs that can be run from a standard 13 amp socket...these are normally single pump tubs. 

                                  Twin pump Hot Tubs need a dedicated 32 amp power supply to be installed at your house. What does this really mean? Well, you would need to get an electrician to visit and present him with our electrical requirements guidelines which you can download in PDF format below. Show him where you would like your new Hot Tub and ask him for a quotation. The cost of this can vary and it all depends on your individual property. The distance from the house is also a factor in this calculation.

                                  Electrical Installation Guidelines

                                  1. The power supplied to the spa must be a dedicated circuit with no other appliances connected.
                                  2. The spa must be permanently connected (hard wired) to the power supply.
                                  3. No plug-in connections or extension leads are to be used.
                                  4. A 30ma RCD (residual current circuit device) must be installed at the power supply in the property.
                                  5. The spa must be supplied with 32 amp feed 220/240 volts.
                                  6. A 32 amp circuit breaker should be installed and clearly marked "spa".
                                  7. The spa should be fed with a 6mm 3-core steel wire armoured cable.
                                  8. Isolation should be via a 32amp 2-pole rotary weatherproof switch.
                                  9. The work must be carried out in accordance with the current (17th edition) IEE wiring regulations and by a qualified electrician.
                                  10. The cable needs to be run to the isolator switch (isolator to be sited a minimum of 2mtrs and ideally a maximum of 5mtrs from the spa) with a minimum 5-metre tail & gland sufficient for connection to the spa. This is how the installation must be left (safe) at this stage.
                                  11. A date and time for the final connection and testing will be arranged between ourselves and the electrician. Our Installation team will deliver and position the spa and also route the cable to the connection point. The electrician will return for final connection & testing on the day of installation.

                                  Please note that these instructions are for guideline purposes only and any electrical work should be carried out or inspected by a qualified electrician prior to installation of the spa.

                                  GENERAL DELIVERY TERMS AND ADVICE

                                  Swim spa Delivery -These are looked at on a case by case basis due to the complexity of delivery variables. Usually, a crane is required. We specialise in minimising and subsidising this cost. We also have several delivery/crane companies we partner with

                                  Hot Tub Delivery –We offer free delivery and installation on all of our hot tubs within 50 miles **

                                  Hot tub deliveries outside this area can still be free!  Give us a call to discuss your individual requirements…..

                                  ** Terms and conditions apply

                                  The hot tub will be delivered on its side on a trolley….No lifting can be done. Small steps can be overcome with the use of ramps. If you suspect you need a crane, call us to discuss, we organise quite a few lifts it may not be as expensive as you think!

                                  Installation Requirements:

                                  What would normally happen in this section is companies would ask you to learn and understand the size of the tub, how it will be delivered, then………. make you decide if it will fit in.

                                  US…let’s do it together….. Site Survey is a must!  We don’t always need to attend your address, after all it’s not 1999 anymore. Facetime, Skype and Google maps and 99% of the time we can get all the info we need. Send us a short video clip of your access… Getting a tub should be fun not a hassle, choosing us helps with that process from start to finish….


                                  For those of you who like visualise how its delivered then these pictures should help, We’ll get a video done soon to take you through the process……

                                  UPDATE..... 

                                  We said we would do a video....This one had a crane (which is additional cost) although not normally required, more importantly the video shows all the other equipment and how the spa is transported on our dolly.

                                   HSG282 Extra info for Holiday Lets/Holiday Parks

                                  Related Products

                                  Recently viewed